Screw-In End Mill for Rhombic indexable Inserts

9181

Article number 9181.160253 | EAN 4037753441534

  • Unit of measurement: metric
    Recommended feed directions of the respective cutters
    Recommended ramping angle
    Holders for screw-in end mills

Screw-in milling cutter body 45° for roughing and finishing applications with rhombic indexable inserts (IC 4.6).

Product features and benefits:

Suitable for chamfering due to 45° geometry.
With internal coolant-lubricant supply, radial outlet (ICR), from M8.
Compatible with standard screw-in -holders and adapters.
For rhombic indexable inserts 9624A, 9625A, 9635, 9635A, 9635G, 9635R, 9679.
Does not include indexable inserts, but torx screws.

International Material Comparison
cutting diameter Ød₁ [mm]:
16 mm
insert size:
IC-4,6
number of flutes Z:
3
outside diameter Ød₂:
8 mm
length l₂:
25 mm
specify thread:
M8
wrench size:
SW 10
mdmax:
15 Nm
category:
Rhombic
overall length l₁:
43 mm
neck diameter Ød₃:
13 mm
version:
Milling Body for Inserts
product line:
FRANKEN
internal coolant supply:
ICR
nmax:
28,000 1/min
note:
without indexabale inserts, with torx-screws
Technical details
cutting diameter Ød₁ [mm]:
16 mm
insert size:
IC-4,6
number of flutes Z:
3
outside diameter Ød₂:
8 mm
length l₂:
25 mm
specify thread:
M8
wrench size:
SW 10
mdmax:
15 Nm
category:
Rhombic
overall length l₁:
43 mm
neck diameter Ød₃:
13 mm
version:
Milling Body for Inserts
product line:
FRANKEN
internal coolant supply:
ICR
nmax:
28,000 1/min
note:
without indexabale inserts, with torx-screws
cutting diameter Ød₁ [mm]
16 mm
insert size
IC-4,6
number of flutes Z
3
outside diameter Ød₂
8 mm
length l₂
25 mm
specify thread
M8
wrench size
SW 10
mdmax
15 Nm
category
Rhombic
overall length l₁
43 mm
neck diameter Ød₃
13 mm
version
Milling Body for Inserts
product line
FRANKEN
internal coolant supply
ICR
nmax
28,000 1/min
note
without indexabale inserts, with torx-screws
Show all