Milling Technology - Indexable milling cutters and inserts
-
Radius to be programmed in CAM
Recommended feed directions of the respective cutters
Recommended ramping angle
Holders for screw-in end mills
- category:
- Time-S4-Cut
- version:
- Milling Body for Inserts
- internal coolant supply:
- ICR
-
Recommended feed directions of the respective cutters
Recommended ramping angle
Holders for shell-type milling cutters
- category:
- Rhombic
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAM
- cutting material:
- PE6
- category:
- Time-S4-Cut
- version:
- Indexable Insert
- coating:
- TIALN
- cutting material:
- KC2
- category:
- Rhombic
- chip former:
- 20 deg
- version:
- Indexable Insert
- coating:
- TIALN
-
Radius to be programmed in CAM
Recommended feed directions of the respective cutters
Recommended ramping angle
Holders for screw-in end mills
- category:
- Time-S-Cut
- version:
- Milling Body for Inserts
- internal coolant supply:
- ICR
- cutting material:
- KP1
- category:
- Circle Segment
- chip former:
- 0 deg
- version:
- Exchangeable Insert
- coating:
- TIALN
-
Ball nose (full radius)
Recommended feed directions of the respective cutters
- category:
- Ball Nose, Circle Segment
- version:
- Milling Body for Inserts
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- internal coolant supply:
- ICR
- exchange precision:
- ±0,01 mm
-
Ball nose (full radius)
- cutting material:
- KP1
- category:
- Ball Nose
- version:
- Exchangeable Insert
- coating:
- TIALSIN
-
High precision corner radius for 3D operations
- cutting material:
- KP1
- category:
- Torus
- chip former:
- 20 deg
- version:
- Exchangeable Insert
- coating:
- TIALSIN
-
Ball nose (full radius)
- cutting material:
- KP1
- category:
- Ball Nose
- chip former:
- 0 deg
- version:
- Exchangeable Insert
- coating:
- TIALN
Screw-in milling body for high-feed milling with Time-S4-Cut indexable inserts (IC 8.5).
Shell-type milling body, DIN 138, for roughing and finishing applications with rhombic indexable inserts (IC 9.2).
Time-S4-Cut carbide indexable insert (IC 8.5) for high-feed milling of 2D and 3D contours in low-alloy steel materials.
Rhombic carbide indexable insert (IC 4.6 / IC 9.2) for roughing and finishing of aluminium alloys and non-ferrous metals.
Screw-in milling body for high-feed milling with Time-S-Cut indexable inserts (IC 8).
Carbide circle segment insert in taper form for high-efficient finishing applications.
End milling body with carbide shank for finishing applications with ball nose inserts.
Carbide ball nose insert for pre-finishing and HSC finishing in many materials, in particular hardened steel materials up to 63 HRC.
Carbide torus insert for HSC pre-finishing and HSC finishing of 2D and 3D contours in steel materials, long-chipping copper alloys and hard materials.
Carbide ball nose insert for pre-finishing and HSC finishing in many materials.