Clamping Mandrel
For clamping gear wheels.
Article number HD400111
-
Mounting position: vertically upright with tailstockClamping system SG
The clamping mandrel is designed for milling the external gearing of the workpiece.
Functional description:
Clamping is initiated via a drawbar on the machine and is transmitted to the clamping bush (system SG) via a quick-change connection and a clamping bolt. In addition, the workpiece is clamped flat on the end faces via a tailstock. Release of clamping is again initiated via the tailstock and the drawbar of the machine. The clamping bush (system SG) is supported by an integrated compression spring.
Advantages:
- Slim design is optimally adapted to the work path of the hobbing cutter- Reduction of set-up times due to quick-change flange connection- High-precision clamping of the workpiece- Additional protection against soiling due to sealing air in the mandrel
- category:
- Clamping Mandrel
- machining:
- toothing
- workpiece:
- gear
- industry:
- transmission, toothing
- clamping-Ø:
- 41,40 mm
- connection spindle side:
- short taper 5
- connection tailstock side:
- SK steep taper
- sealing air:
- yes
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,005 mm
- transferable torque:
- 45 Nm
- outer-Ø:
- 125,00 mm
- overall length:
- 382,50 mm
- weight clamping device:
- 9,5 kg
- weight workpiece:
- 0,4 kg
- material workpiece:
- steel
- category:
- Clamping Mandrel
- machining:
- toothing
- workpiece:
- gear
- industry:
- transmission, toothing
- clamping-Ø:
- 41,40 mm
- connection spindle side:
- short taper 5
- connection tailstock side:
- SK steep taper
- sealing air:
- yes
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,005 mm
- transferable torque:
- 45 Nm
- outer-Ø:
- 125,00 mm
- overall length:
- 382,50 mm
- weight clamping device:
- 9,5 kg
- weight workpiece:
- 0,4 kg
- material workpiece:
- steel