carbide thread milling cutter | Emuge Franken Website

Machining of external thread

Product features and benefits:

tool with straight flutes
pre-machined bolt necessaryfor a specific pitchfor several dimensionscutter diameter should be smaller than thread diam.

International material comparison

Technical details

thread symbol:: M, MF
nominal diameter d₁ [mm]:: 14 mm - 999 mm
nominal diameter [in]:: 0.551 " - 39.331 "
pitch [mm]:: 1 mm
thread orientation:: external
basic version:: GF - thread milling cutter
type:: thread milling cutter
coolant supply:: IKZ
coating:: without
shank diameter d₂:: 16 mm
OAL l₁:: 90 mm
length of cutting edge l₂:: 25.5 mm
usable length l₃:: 25.5 mm
flutes /number of ridges:: 5
length of shank:: 48 mm
diameter of milling part:: 15.9
cutting material:: HM

thread symbol

M, MF

nominal diameter d₁ [mm]

14 mm - 999 mm

nominal diameter [in]

0.551 " - 39.331 "

pitch [mm]

1 mm

thread orientation

external

basic version

GF - thread milling cutter

type

thread milling cutter

coolant supply

IKZ

coating

without

shank diameter d₂

16 mm

OAL l₁

90 mm

length of cutting edge l₂

25.5 mm

usable length l₃

25.5 mm

flutes /number of ridges

length of shank

48 mm

diameter of milling part

15.9

cutting material

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² like Cq15, 1.1132, S235JR (St37-2), 1.0037 P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² like E360 (St70-2), 1.0070, 16MnCr5, 1.7131 P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² like 20MoCr3, 1.7320, 42CrMo4, 1.7225, 102Cr6 P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² like 50CrMo4, 1.7228, X45NiCrMo4, 1.2767, 31CrMo1 P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² like X38CrMoV5-3, 1.2367, X100CrMoV8-1-1, 1.2990 No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² like EN-GJL-200 (GG20), EN-JL-1030 K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² like EN-GJL-300 (GG30), EN-JL-1050 K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² like EN-GJS-400-15 (GGG40), EN-JS-1030 K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² like EN-GJS-700-2 (GGG70), EN-JS-1070 K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² like GJV 300 K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² like GJV 450 K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² like EN-GJMW-350-4 (GTW-35), EN-JM-1010 K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² like EN-GJMB-450-6 (GTS-45), EN-JM-1140 No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² like EN AW-AlMn1, EN AW-3103 N1.2 Aluminium wrought alloys <= 350 N/mm² like EN AW-AlMgSi, EN AW-6060 N1.3 Aluminium wrought alloys <= 550 N/mm² like EN AW-AlZn5Mg3Cu,EN AW-7022 N1.4 Aluminium cast alloys Si <= 7% like EN AC-AlMg5, EN AC-51300 N1.5 Aluminium cast alloys 7% < Si <= 12% like EN AC-AlSi9Cu3, EN AC-46500 N2.1 Pure copper, low-alloyed copper <= 400 N/mm² like E-Cu 57, EN CW 004 A N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² like CuZn37 (Ms63), EN CW 508 L N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² like CuZn36Pb3 (Ms58), EN CW 603 N N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² like CuAl10Ni5Fe4, EN CW 307 G N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² like CuSn8P, EN CW 459 K N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² like CuSn7 ZnPb (Rg7), 2.1090 N3.1 Magnesium wrought alloys <= 500 N/mm² like MgAl6Zn, 3.5612 N3.2 Magnesium cast alloys <= 500 N/mm² like EN-MCMgAl9Zn1, EN-MC21120 N4.1 Duroplastics (short-chipping) like Bakelit, Pertinax N4.2 Thermoplastics (long-chipping) like PMMA, POM, PVC, PEEK N5.2 Tungsten-copper alloys like W-Cu 80/20 N5.1 Graphite like C 8000 No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² like Ti1, 3.7025 S1.2 Titanium alloys <= 900 N/mm² like TiAl6V4, 3.7165 S1.3 Titanium alloys <= 1250 N/mm² like TiAl4Mo4Sn2, 3.7185 No results found

Unit	Millimeter Inch

GF-Ext.-IKZ-HB

Product features and benefits:

Downloads to the product