GF-H-R10-IKZ-HB-TiCN
solid carbide thread milling cutters
Item number GF927126.0120
Machining of internal thread
Product features and benefits:
For hard machining from 55HRCsmooth milling thanks to flutes with 10° helix anglepre-drilled taphole necessarytool for a specific dimension with corrected thread profile
International material comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 19.95 mm - 22 mm
- nominal diameter [in]:
- 0.785 " - 0.866 "
- pitch [mm]:
- 2.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- thread milling cutter-H-R10
- coolant supply:
- IKZ
- helix direction:
- R10
- clamping flat:
- HB
- shank standard:
- DIN 6535
- coating:
- TICN
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 33.647 mm
- usable length l₃:
- 33.7 mm
- flutes /number of ridges:
- 5
- length of shank:
- 48 mm
- diameter of milling part:
- 15.9
- cutting material:
- HM
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 19.95 mm - 22 mm
- nominal diameter [in]:
- 0.785 " - 0.866 "
- pitch [mm]:
- 2.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- thread milling cutter-H-R10
- coolant supply:
- IKZ
- helix direction:
- R10
- clamping flat:
- HB
- shank standard:
- DIN 6535
- coating:
- TICN
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 33.647 mm
- usable length l₃:
- 33.7 mm
- flutes /number of ridges:
- 5
- length of shank:
- 48 mm
- diameter of milling part:
- 15.9
- cutting material:
- HM
thread symbol
M
nominal diameter d₁ [mm]
19.95 mm - 22 mm
nominal diameter [in]
0.785 " - 0.866 "
pitch [mm]
2.5 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
thread milling cutter-H-R10
coolant supply
IKZ
helix direction
R10
clamping flat
HB
shank standard
DIN 6535
coating
TICN
shank diameter d₂
16 mm
OAL l₁
100 mm
length of cutting edge l₂
33.647 mm
usable length l₃
33.7 mm
flutes /number of ridges
5
length of shank
48 mm
diameter of milling part
15.9
cutting material
HM
Cutting value calculator
Calculator result
The cutting data shown are standard values,
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D-tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D-tool drawing as per DIN SPEC 69874 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D-tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active