Technique de fraisage - Outils de fraisage à queue cylindrique
-
Finishing end mill without chip breaker for almost all materials.
Corner protection chamfer (bevelled edge) for stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 34-38 deg
-
Finishing end mill without chip breaker for almost all materials.
Corner radius for the stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
Roughing end mill with round and fine knuckle form profile.
Corner protection chamfer (bevelled edge) for stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg
-
Roughing end mill with round and fine knuckle form profile.
Radius to be programmed in CAM
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Corner Radius (Duplex)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
Semi-finishing end mill with flat and fine knuckle form profile.
Corner protection chamfer (bevelled edge) for stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
Semi-finishing end mill with flat and fine knuckle form profile.
Corner radius for the stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
Finishing end mill without chip breaker for soft materials.
Corner radius for the stabilization of the edge
Recommended feed directions of the respective cutters
- cutting material:
- HM
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 38-40 deg
-
Roughing end mill with round and coarse knuckle form profile for soft materials.
Corner protection chamfer (bevelled edge) for stabilization of the edge
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
Finishing end mill without chip breaker for hardened materials.
Corner protection chamfer (bevelled edge) for stabilization of the edge
Recommended feed directions of the respective cutters
- cutting material:
- HM
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 50 deg
-
Finishing end mill without chip breaker for hardened materials.
High precision corner radius for 3D-operations
Recommended feed directions of the respective cutters
The specific angle of 3° to 5° is the recommended angle for ramping applications
- cutting material:
- HM
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
Fraise carbure TOP-Cut version longue pour ébauche et finition dans quasiment toutes les matières.
Fraise carbure TOP-Cut version longue pour ébauche et finition dans quasiment toutes les matières.
Fraise carbure Multi-Cut version longue, avec méplat et hauteur de coupe réduite pour ébauche hautes performances dans une grande plage de matières.
Fraise carbure TOP-Cut version longue pour ébauche et finition dans quasiment toutes les matières.
Fraise carbure TiNox-Cut avec méplat pour ébauche dans matières difficiles à usiner.
Fraise carbure TiNox-Cut avec méplat pour ébauche dans matières difficiles à usiner.
Fraise carbure Alu-Cut avec méplat, version longue pour ébauche et finition dans alliages d'aluminium corroyés.
Fraise carbure Alu-Cut version longue pour ébauche dans alliages d'aluminium corroyés et alliages de cuivre.
Fraise carbure Hard-Cut version extra-longue pour finition dans matières difficiles jusqu'à 66 HRC.
Fraise torique carbure Hard-Cut pour finition dans de nombreuses matières, y compris les matériaux durs.