Milling Technology - End mill cutters

8752 suitable variants
Metric unit system: metric
Reset all filters
    • without chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill Top-Cut in long design for roughing and finishing in almost all materials.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535, ASME
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    35-38 deg
    • without chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill Top-Cut in long design for roughing and finishing in almost all materials.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    35-38 deg
    • with round, fine chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill Multi-Cut in long design, with lateral drive flat and short cutting edge for high-performance roughing in many materials.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535, ASME
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    45 deg
    • with round, fine chip breaker
      Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill Multi-Cut Duplex in long design for high-performance roughing in almost all materials.

    cutting material:
    carbide
    category:
    End Mill, High Feed Cutter
    version:
    Corner Radius (Duplex)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • with flat, fine chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill TiNox-Cut with lateral drive flat for roughing operations in difficult-to-machine materials.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • with flat, fine chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill TiNox-Cut in extra-long design for roughing operations in difficult-to-machine materials.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • without chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters

    Carbide end mill Alu-Cut in long version with lateral drive flat for roughing and finishing in wrought aluminium alloys and copper alloys.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    38-40 deg
    • with round, coarse chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Carbide end mill Alu-Cut in long design for roughing in wrought aluminium alloys and copper alloys.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    40 deg
    • without chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters

    Carbide end mill Hard-Cut in extra long version for finishing high-strength materials up to 66 HRC.

    cutting material:
    carbide
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535, ASME
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    50 deg
    • without chip breaker
      High precision corner radius for 3D operations
      Recommended feed directions of the respective cutters
      Possible axial depth
      Recommended ramping angle

    Carbide torus end mill Hard-Cut with 4 flutes in short design (3xD) for finishing applications in hardened workpiece materials.

    cutting material:
    carbide
    category:
    Torus End Mill
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    0 deg