Milling Technology - End mill cutters
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 38/39 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 38-40 deg
-
with flat, medium chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersPossible axial depth
- cutting material:
- carbide
- category:
- End Mill, Trochoidal End Mill
- version:
- Corner Radius
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 38-42 deg
-
with flat, medium chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersPossible axial depth
- cutting material:
- carbide
- category:
- End Mill, Trochoidal End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 38-42 deg
TOP-Cut VAR carbide end mill with 4 flute design for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 4 flute design for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 5 flute design with Weldon flat for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 5 flute design for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 6 flute design with Weldon flat for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 6 flute design for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 7 flute stub design with Weldon flat for light roughing and finishing in almost all materials, including aerospace alloys.
TOP-Cut VAR carbide end mill with 7 flute stub design for light roughing and finishing in almost all materials, including aerospace alloys.
TiNox-Cut Trochoid carbide end mill with Weldon flat and 4xD design for trochoidal roughing of difficult to machine and tough materials.
TiNox-Cut Trochoid carbide end mill with Weldon flat and 3xD design for trochoidal roughing of difficult to machine and tough materials.