Clamping Mandrel
For clamping differential housings.
Article number HD400008
-
_Web_Einbaulage_vertikal_stehend_mit_Reitstock.svg)
Mounting position: vertically upright with tailstock
_Web_Spannsystem_SG.svg)
Clamping system SG
_Web_Spannsystem_SZ.svg)
Clamping system SZ
The clamping mandrel is designed for a turning and drilling operation of the workpiece.
Functional description:
The workpiece is additionally supported by means of a tailstock. The clamping range is very narrow for both clamping diameters. Clamping is initiated on the tailstock side via a thrust bar on the machine side and is passed on to the collet (system SZ) via a thrust piece.Advantages:- quick-change connection- additional workpiece support- two clamping points
- category:
- Clamping Mandrel
- machining:
- drill, turning
- workpiece:
- housing
- industry:
- transmission, commercial vehicles, toothing, powertrain
- clamping-Ø:
- 36,00 mm bis 61,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- cylinder ≤ 70
- airflow control device:
- direct
- sealing air:
- yes
- clamping tool quick-changeable:
- yes
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 60 Nm
- outer-Ø:
- 340,00 mm
- overall length:
- 515,00 mm
- weight clamping device:
- 42 kg
Technical details
- category:
- Clamping Mandrel
- machining:
- drill, turning
- workpiece:
- housing
- industry:
- transmission, commercial vehicles, toothing, powertrain
- clamping-Ø:
- 36,00 mm bis 61,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- cylinder ≤ 70
- airflow control device:
- direct
- sealing air:
- yes
- clamping tool quick-changeable:
- yes
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 60 Nm
- outer-Ø:
- 340,00 mm
- overall length:
- 515,00 mm
- weight clamping device:
- 42 kg
category
Clamping Mandrel
machining
drill, turning
workpiece
housing
industry
transmission, commercial vehicles, toothing, powertrain
clamping-Ø
36,00 mm bis 61,00 mm
connection spindle side
short taper 6
connection tailstock side
cylinder ≤ 70
airflow control device
direct
sealing air
yes
clamping tool quick-changeable
yes
fitting position
vertically upright with tailst
concentricity at control workpiece
0,010 mm
transferable torque
60 Nm
outer-Ø
340,00 mm
overall length
515,00 mm
weight clamping device
42 kg