Clamping Mandrel
For clamping impeller wheels.
Article number HD400004
-
Mounting position: horizontal
Clamping system SG
The clamping mandrel is designed for milling the outer contour, as well as for a turning operation of the flat faces of the workpiece.
Functional description:
These clamping bushes are decoupled by an intermediate bush and can expand differently. Interchangeable clamping sets, consisting of intermediate bush and end stop, were installed for the different workpiece sizes. Inaccuracies in the bore can be compensated by clamping in two planes.Advantages:- Compensation of bore inaccuracies by means of two decoupled clamping bushes- Machining of different workpiece lengths thanks to quick-change end stops
- category:
- Clamping Mandrel
- machining:
- turning, milling
- workpiece:
- wheel
- industry:
- pump
- clamping-Ø:
- 60,00 mm
- connection spindle side:
- cylinder ≤ 300
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 150 Nm
- outer-Ø:
- 320,00 mm
- overall length:
- 320,00 mm
- weight clamping device:
- 36 kg
- weight workpiece:
- 28 kg
- material workpiece:
- steel
Technical details
- category:
- Clamping Mandrel
- machining:
- turning, milling
- workpiece:
- wheel
- industry:
- pump
- clamping-Ø:
- 60,00 mm
- connection spindle side:
- cylinder ≤ 300
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 150 Nm
- outer-Ø:
- 320,00 mm
- overall length:
- 320,00 mm
- weight clamping device:
- 36 kg
- weight workpiece:
- 28 kg
- material workpiece:
- steel
category
Clamping Mandrel
machining
turning, milling
workpiece
wheel
industry
pump
clamping-Ø
60,00 mm
connection spindle side
cylinder ≤ 300
fitting position
horizontal
concentricity at control workpiece
0,010 mm
transferable torque
150 Nm
outer-Ø
320,00 mm
overall length
320,00 mm
weight clamping device
36 kg
weight workpiece
28 kg
material workpiece
steel