Clamping Chuck
For clamping rotor shafts and the corresponding turbine wheels.
Article number HD400006
-
Mounting position: vertically upright with tailstock
Clamping system SG
Clamping system SZ
The clamping chuck with pressure unit is designed for an electron beam welding process in vacuum.
Functional description:
The turbine wheel is clamped via the pressure unit with a collet (system SZ). Integrated compression springs ensure the release of clamping. The turbine wheel is moved downwards by 2 mm by means of the pressure unit, until it lies flat against the rotor shaft. Electron beam welding in a vacuum welds the two parts together to form the turbocharger rotor wheel.Advantages:- Repeat-accurate clamping of the components for a precisely fitting contact connection
- category:
- Clamping Chuck
- machining:
- welding
- workpiece:
- wheel, shaft
- industry:
- engine
- clamping-Ø:
- 6,00 mm / 35,20 mm
- connection spindle side:
- cylinder ≤ 110
- connection tailstock side:
- cylinder ≤ 32
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,032 mm / 0,020 mm
- transferable torque:
- 3 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 290,00 mm
- weight clamping device:
- 22 kg
- weight workpiece:
- 0,02 kg / 0,1 kg
- material workpiece:
- quenched and tempered steel
Technical details
- category:
- Clamping Chuck
- machining:
- welding
- workpiece:
- wheel, shaft
- industry:
- engine
- clamping-Ø:
- 6,00 mm / 35,20 mm
- connection spindle side:
- cylinder ≤ 110
- connection tailstock side:
- cylinder ≤ 32
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,032 mm / 0,020 mm
- transferable torque:
- 3 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 290,00 mm
- weight clamping device:
- 22 kg
- weight workpiece:
- 0,02 kg / 0,1 kg
- material workpiece:
- quenched and tempered steel
category
Clamping Chuck
machining
welding
workpiece
wheel, shaft
industry
engine
clamping-Ø
6,00 mm / 35,20 mm
connection spindle side
cylinder ≤ 110
connection tailstock side
cylinder ≤ 32
fitting position
vertically upright with tailst
concentricity at control workpiece
0,032 mm / 0,020 mm
transferable torque
3 Nm
outer-Ø
190,00 mm
overall length
290,00 mm
weight clamping device
22 kg
weight workpiece
0,02 kg / 0,1 kg
material workpiece
quenched and tempered steel