Rekord-STEEL
machine taps
Article number A0181000.3287
-
Hole type: through holeHole type: blind holeChamfer form C, chamfer length 2-3 threads
HSSE tap for applications in steel materials.
Product features and benefits:
International Material Comparison- thread symbol:
- W-KEG
- nominal diameter d₁ [mm]:
- 28.8 mm
- nominal diameter [in]:
- 0 "
- pitch [mm]:
- 1.81 mm
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 22 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 37 mm
- square ◘:
- 18 mm
- end position t₄:
- 27.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- W-KEG
- nominal diameter d₁ [mm]:
- 28.8 mm
- nominal diameter [in]:
- 0 "
- pitch [mm]:
- 1.81 mm
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 22 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 37 mm
- square ◘:
- 18 mm
- end position t₄:
- 27.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
W-KEG
nominal diameter d₁ [mm]
28.8 mm
nominal diameter [in]
0 "
pitch [mm]
1.81 mm
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
STEEL
Coating
without
shank diameter d₂
22 mm
OAL l₁
100 mm
length of cutting edge l₂
37 mm
square ◘
18 mm
end position t₄
27.5 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.