Clamping Mandrel
For clamping telescopic sights.
Article number HD400031
-
Mounting position: horizontal with tailstockClamping system SG
The clamping mandrel is designed for turning the inner and outer contour of the workpiece.
Functional description:
Clamping is initiated on the spindle side via a drawbar on the machine and is transmitted to the rear clamping sleeve (system SG) via a draw piece. An integrated disc spring assembly is used to initiate the clamping of the front clamping bush (SG system). The workpiece is supported by means of a centering point on the tailstock. In addition, three protruding pins on the end stop are used to secure the workpiece against twisting and a positive torque is transmitted.
Advantages:
- two independent clamping points for accurate and repeatable workpiece alignment- low-deformation clamping of very thin-walled components- very reliably transmittable torque due to three pins on the end stop, positive locking connection with three recesses to the workpiece- retractable end stop enables the machining of the left face on the workpiece
- category:
- Clamping Mandrel
- machining:
- turning
- workpiece:
- bush
- industry:
- optics & micro
- clamping-Ø:
- 22,00 mm / 43,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- centering point
- sealing air:
- yes
- central lubrication:
- yes
- fitting position:
- horizontally with tailstock
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 60 Nm
- outer-Ø:
- 180,00 mm
- overall length:
- 358,00 mm
- weight clamping device:
- 20 kg
- category:
- Clamping Mandrel
- machining:
- turning
- workpiece:
- bush
- industry:
- optics & micro
- clamping-Ø:
- 22,00 mm / 43,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- centering point
- sealing air:
- yes
- central lubrication:
- yes
- fitting position:
- horizontally with tailstock
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 60 Nm
- outer-Ø:
- 180,00 mm
- overall length:
- 358,00 mm
- weight clamping device:
- 20 kg