ZBGF-W-2xD-R30-IKZ-HA-TiAlN-T4
solid carbide cicular drill thread mills
Article number GF732857.5013
Machining of tap hole and internal thread.
Product features and benefits:
For workpiece material up to 44 HRCPredrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 12.65 mm - 15 mm
- nominal diameter [in]:
- 0.498 " - 0.591 "
- nominal size:
- 1/2
- pitch [mm]:
- 1.954 mm
- pitch [in]:
- 0.077 "
- threads per inch:
- 13
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-W
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TIALN-T4
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 86 mm
- length of cutting edge l₂:
- 8.862 mm
- usable length l₃:
- 33.4 mm
- flutes /number of ridges:
- 4
- clamping length l₄:
- 45 mm
- diameter of milling part dF:
- 10.08
- cutting material:
- carbide
Technical details
- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 12.65 mm - 15 mm
- nominal diameter [in]:
- 0.498 " - 0.591 "
- nominal size:
- 1/2
- pitch [mm]:
- 1.954 mm
- pitch [in]:
- 0.077 "
- threads per inch:
- 13
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-W
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TIALN-T4
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 86 mm
- length of cutting edge l₂:
- 8.862 mm
- usable length l₃:
- 33.4 mm
- flutes /number of ridges:
- 4
- clamping length l₄:
- 45 mm
- diameter of milling part dF:
- 10.08
- cutting material:
- carbide
thread symbol
UNC
nominal diameter d₁ [mm]
12.65 mm - 15 mm
nominal diameter [in]
0.498 " - 0.591 "
nominal size
1/2
pitch [mm]
1.954 mm
pitch [in]
0.077 "
threads per inch
13
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
ZBGF-W
coolant supply
IKZ
helix direction
R30
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TIALN-T4
shank diameter d₂
12 mm
OAL l₁
86 mm
length of cutting edge l₂
8.862 mm
usable length l₃
33.4 mm
flutes /number of ridges
4
clamping length l₄
45 mm
diameter of milling part dF
10.08
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.