GF-R30-lg-IKZ-HE
solid carbide thread milling cutters for internal threads
Article number GF162631.9582
Machining of internal threads.
Product features and benefits:
Deep threads possible thanks to long milling part.Smooth milling operation thanks to flutes with 30° helix angle.Predrilled tap hole necessary.Pitch-dependent.Cross-dimensional.For internal threads the diameter of the end mill should be smaller than 2/3 or 3/4 of the thread diameter.
International Material Comparison- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- thread orientation:
- internal
- type:
- GF-R30-long
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HE
- helix direction:
- R30
- shank standard:
- DIN 6535
- Coating:
- without
- shank diameter d₂:
- 16 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 32.455 mm
- OAL l₁:
- 100 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 15.9
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- thread orientation:
- internal
- type:
- GF-R30-long
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HE
- helix direction:
- R30
- shank standard:
- DIN 6535
- Coating:
- without
- shank diameter d₂:
- 16 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 32.455 mm
- OAL l₁:
- 100 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 15.9
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
thread symbol
UN, UNC, UNEF, UNF, UNS
nominal diameter d₁ [mm]
22 mm - 999 mm
nominal diameter [in]
0.866 " - 39.331 "
nominal size
1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
pitch [mm]
1.588 mm
pitch [in]
0.062 "
threads per inch
16
thread orientation
internal
type
GF-R30-long
basic version
GF - thread milling cutter
coolant supply
IKZ
clamping flat
HE
helix direction
R30
shank standard
DIN 6535
Coating
without
shank diameter d₂
16 mm
direction of tool rotation
RH
length of cutting edge l₂
32.455 mm
OAL l₁
100 mm
flutes /number of ridges
5
diameter of milling part dF
15.9
clamping length l₄
48 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.