Clamping Mandrel
For clamping turbine wheels.
Article number HD400009
-
Mounting position: vertically upright with tailstockClamping system SZ
The clamping mandrel is designed for milling the outer contour of the workpiece.
Functional description:
Clamping is initiated by an integrated disc spring assembly and is transmitted to the double taper collet (system SZ) via a draw piece. The unclamping action is initiated by a manual torque. The workpiece is clamped flat via a clamping screw by initiating a manual torque.
Advantages:
- Very stable workpiece support thanks to special support faces of the end stop- Two clamping points
- category:
- Clamping Mandrel
- machining:
- milling, drill
- workpiece:
- wheel
- industry:
- drive technology, aviation
- clamping-Ø:
- 337,50 mm
- connection spindle side:
- cylinder ≤ 140
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,015 mm
- transferable torque:
- 1.200 Nm
- outer-Ø:
- 560,00 mm
- overall length:
- 579,00 mm
- weight clamping device:
- 400 kg
Technical details
- category:
- Clamping Mandrel
- machining:
- milling, drill
- workpiece:
- wheel
- industry:
- drive technology, aviation
- clamping-Ø:
- 337,50 mm
- connection spindle side:
- cylinder ≤ 140
- fitting position:
- vertically upright with tailst
- concentricity at control workpiece :
- 0,015 mm
- transferable torque:
- 1.200 Nm
- outer-Ø:
- 560,00 mm
- overall length:
- 579,00 mm
- weight clamping device:
- 400 kg
category
Clamping Mandrel
machining
milling, drill
workpiece
wheel
industry
drive technology, aviation
clamping-Ø
337,50 mm
connection spindle side
cylinder ≤ 140
fitting position
vertically upright with tailst
concentricity at control workpiece
0,015 mm
transferable torque
1.200 Nm
outer-Ø
560,00 mm
overall length
579,00 mm
weight clamping device
400 kg