Freestechniek - Freesgereedschap met cilindrische schacht

8767 Geschikte varianten
Metrisch Eenheden systeem: Metrisch
Reset alle filters
    • without chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    TOP-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen en finiseren in diverse materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Vlakke snijkant (met afschuining)
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535, ASME
    Coating:
    TIALN
    Interne koeling:
    Zonder
    Spiraalhoek:
    35-38°
    • without chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    TOP-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen en finiseren in diverse materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Hoekradius
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    TIALN
    Interne koeling:
    Zonder
    Spiraalhoek:
    35-38°
    • with round, fine chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Multi-Cut volhardmetalen schachtfrees, lange uitvoering met Weldon opname en een korte snijlengte voor high-performance ruwen in diverse materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Vlakke snijkant (met afschuining)
    Gereedschap interface:
    Cylindrische schacht met Weldonvlak
    Standaard gereedschapsinterface:
    DIN 6535, ASME
    Coating:
    TIALN
    Interne koeling:
    Zonder
    Spiraalhoek:
    45°
    • with round, fine chip breaker
      Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Multi-Cut Duplex volhardmetalen schachtfrees, lange uitvoering voor high-performance ruwen in diverse materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees, High Feed Cutter
    Uitvoering:
    Hoekradius (Duplex)
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    TIALN
    Interne koeling:
    ICA
    Spiraalhoek:
    45°
    • with flat, fine chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    TiNox-Cut volhardmetalen schachtfrees met Weldon opname voor het ruwen in moeilijk verspaanbare materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Vlakke snijkant (met afschuining)
    Gereedschap interface:
    Cylindrische schacht met Weldonvlak
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    TIN / TIALN
    Interne koeling:
    ICA
    Spiraalhoek:
    45°
    • with flat, fine chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    TiNox-Cut volhardmetalen schachtfrees, extra lange uitvoering voor het ruwen in moeilijk verspaanbare materialen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Hoekradius
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    TIN / TIALN
    Interne koeling:
    ICA
    Spiraalhoek:
    45°
    • without chip breaker
      Corner radius for the stabilisation of the cutting edge
      Recommended feed directions of the respective cutters

    Alu-Cut volhardmetalen schachtfrees, lange uitvoering met Weldon opname voor het ruwen en finiseren in aluminium gietlegeringen en koperlegeringen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Hoekradius
    Gereedschap interface:
    Cylindrische schacht met Weldonvlak
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    GLT
    Interne koeling:
    Zonder
    Spiraalhoek:
    38-40°
    • with round, coarse chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters
      Recommended ramping angle

    Alu-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen in aluminium gietlegeringen en koperlegeringen.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Vlakke snijkant (met afschuining)
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    GLT
    Interne koeling:
    Zonder
    Spiraalhoek:
    40°
    • without chip breaker
      Corner protection chamfer (bevelled edge) for stabilisation of the edge
      Recommended feed directions of the respective cutters

    Hard-Cut volharmetalen schachtfrees, extra lange uitvoering voor het finiseren in materialen met een hoge treksterkte tot 66 Hrc.

    Snijmateriaal:
    HM
    Categorie:
    Schachtfrees
    Uitvoering:
    Vlakke snijkant (met afschuining)
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535, ASME
    Coating:
    TIALN
    Interne koeling:
    Zonder
    Spiraalhoek:
    50°
    • without chip breaker
      High precision corner radius for 3D operations
      Recommended feed directions of the respective cutters
      Possible axial depth
      Recommended ramping angle

    Carbide torus end mill Hard-Cut with 4 flutes in short design (3xD) for finishing applications in hardened workpiece materials.

    Snijmateriaal:
    HM
    Categorie:
    Torusfrees
    Gereedschap interface:
    Gladde cilindrische schacht
    Standaard gereedschapsinterface:
    DIN 6535
    Coating:
    TIALN
    Interne koeling:
    Zonder
    Spiraalhoek: