GF-Vario-Z-R15-HE
solid carbide thread milling cutters
Article number GFB35401.0030
Machining of internal threads.
Product features and benefits:
Short machining time due to more flutes.Deep thread possible thanks to long thread part.Smooth milling operation thanks to flutes with 15° helix angle.Predrilled tap hole necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter [in]:
- 0.116 " - 39.331 "
- nominal diameter d₁ [mm]:
- 2.95 mm - 999 mm
- pitch [mm]:
- 0.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Vario-Z-R15
- coolant supply:
- without
- helix direction:
- R15
- clamping flat:
- HE
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 51 mm
- shank diameter d₂:
- 6 mm
- length of cutting edge l₂:
- 6 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 2.4
- clamping length l₄:
- 36 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter [in]:
- 0.116 " - 39.331 "
- nominal diameter d₁ [mm]:
- 2.95 mm - 999 mm
- pitch [mm]:
- 0.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Vario-Z-R15
- coolant supply:
- without
- helix direction:
- R15
- clamping flat:
- HE
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 51 mm
- shank diameter d₂:
- 6 mm
- length of cutting edge l₂:
- 6 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 2.4
- clamping length l₄:
- 36 mm
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter [in]
0.116 " - 39.331 "
nominal diameter d₁ [mm]
2.95 mm - 999 mm
pitch [mm]
0.5 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-Vario-Z-R15
coolant supply
without
helix direction
R15
clamping flat
HE
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
OAL l₁
51 mm
shank diameter d₂
6 mm
length of cutting edge l₂
6 mm
flutes /number of ridges
4
diameter of milling part dF
2.4
clamping length l₄
36 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.