Enorm 2-STEEL
machine taps
Article number C0501000.5022
-
Hole type: blind holeChamfer form C, chamfer length 2-3 threads
HSSE taps for applications in many materials.
Product features and benefits:
International Material Comparison- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 38.1 mm
- nominal diameter [in]:
- 1.5 "
- nominal size:
- 1 1/2
- pitch [mm]:
- 4.233 mm
- pitch [in]:
- 0.167 "
- threads per inch:
- 6
- constructional design:
- similar DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Enorm - right-hand spiral flutes > R25
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 28 mm
- length of cutting edge l₂:
- 40 mm
- OAL l₁:
- 200 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 34 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 38.1 mm
- nominal diameter [in]:
- 1.5 "
- nominal size:
- 1 1/2
- pitch [mm]:
- 4.233 mm
- pitch [in]:
- 0.167 "
- threads per inch:
- 6
- constructional design:
- similar DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Enorm - right-hand spiral flutes > R25
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 28 mm
- length of cutting edge l₂:
- 40 mm
- OAL l₁:
- 200 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 34 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
UNC
nominal diameter d₁ [mm]
38.1 mm
nominal diameter [in]
1.5 "
nominal size
1 1/2
pitch [mm]
4.233 mm
pitch [in]
0.167 "
threads per inch
6
constructional design
similar DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Enorm - right-hand spiral flutes > R25
Geometry
STEEL
Coating
without
shank diameter d₂
28 mm
length of cutting edge l₂
40 mm
OAL l₁
200 mm
square ◘
22 mm
tap hole diameter
34 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.