GF-R30-IKZ-HA-TiCN
solid carbide thread milling cutters for internal and external threads
Article number GF162756.9550
Machining of internal or external threads.
Product features and benefits:
Smooth milling operation thanks to flutes with 30° helix angle.Predrilled tap hole respectively premachined bolt necessary.Pitch-dependent.Cross-dimensional.The diameter of the end mill should be smaller than 2/3 respectively 3/4 of the thread diameter for internal threads.For external threads the diameter of the end mill should be smaller than the thread diameter.
International Material Comparison- thread symbol:
- BSF, BSW, G, RP, W
- nominal diameter d₁ [mm]:
- 30 mm - 999 mm
- nominal diameter [in]:
- 1.181 " - 39.331 "
- nominal size:
- 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 4, 7/8
- pitch [mm]:
- 2.309 mm
- pitch [in]:
- 0.091 "
- threads per inch:
- 11
- thread orientation:
- internal, external
- basic version:
- GF - thread milling cutter
- type:
- GF-R30
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 105 mm
- length of cutting edge l₂:
- 33.481 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 50 mm
- diameter of milling part dF:
- 19.9
- cutting material:
- carbide
Technical details
- thread symbol:
- BSF, BSW, G, RP, W
- nominal diameter d₁ [mm]:
- 30 mm - 999 mm
- nominal diameter [in]:
- 1.181 " - 39.331 "
- nominal size:
- 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 4, 7/8
- pitch [mm]:
- 2.309 mm
- pitch [in]:
- 0.091 "
- threads per inch:
- 11
- thread orientation:
- internal, external
- basic version:
- GF - thread milling cutter
- type:
- GF-R30
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 105 mm
- length of cutting edge l₂:
- 33.481 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 50 mm
- diameter of milling part dF:
- 19.9
- cutting material:
- carbide
thread symbol
BSF, BSW, G, RP, W
nominal diameter d₁ [mm]
30 mm - 999 mm
nominal diameter [in]
1.181 " - 39.331 "
nominal size
1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 4, 7/8
pitch [mm]
2.309 mm
pitch [in]
0.091 "
threads per inch
11
thread orientation
internal, external
basic version
GF - thread milling cutter
type
GF-R30
coolant supply
IKZ
helix direction
R30
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TICN
shank diameter d₂
20 mm
OAL l₁
105 mm
length of cutting edge l₂
33.481 mm
flutes /number of ridges
5
clamping length l₄
50 mm
diameter of milling part dF
19.9
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.