GF-Ext.-IKZ-HB-TiCN
solid carbide thread milling cutters for external thread
Article number GF161216.9512
Machining of external threads.
Product features and benefits:
Tool with straight flutes.Pre-machined bolt required.Pitch-dependent.Cross-dimensional.The milling cutter diameter should be smaller than the thread diameter.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 8 mm - 999 mm
- nominal diameter [in]:
- 0.315 " - 39.331 "
- pitch [mm]:
- 1 mm
- thread orientation:
- external
- type:
- GF
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HB
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 10 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 16.5 mm
- OAL l₁:
- 70 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.9
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 8 mm - 999 mm
- nominal diameter [in]:
- 0.315 " - 39.331 "
- pitch [mm]:
- 1 mm
- thread orientation:
- external
- type:
- GF
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HB
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 10 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 16.5 mm
- OAL l₁:
- 70 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.9
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
8 mm - 999 mm
nominal diameter [in]
0.315 " - 39.331 "
pitch [mm]
1 mm
thread orientation
external
type
GF
basic version
GF - thread milling cutter
coolant supply
IKZ
clamping flat
HB
helix direction
straight
shank standard
DIN 6535
Coating
TICN
shank diameter d₂
10 mm
direction of tool rotation
RH
length of cutting edge l₂
16.5 mm
OAL l₁
70 mm
flutes /number of ridges
4
diameter of milling part dF
9.9
clamping length l₄
40 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.