ZBGF-T-3xD-IKZ-HB-TiCN
solid carbide cicular drill thread mills
Article number GF753276.0112
Machining of tap hole and internal thread.
Product features and benefits:
For thread depths up to 3xD.Predrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- nominal diameter [in]:
- 0.47 " - 0.551 "
- pitch [mm]:
- 1.75 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-T
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 12 mm
- length of cutting edge l₂:
- 7 mm
- OAL l₁:
- 100 mm
- usable length l₃:
- 37.4 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.2
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- nominal diameter [in]:
- 0.47 " - 0.551 "
- pitch [mm]:
- 1.75 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-T
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 12 mm
- length of cutting edge l₂:
- 7 mm
- OAL l₁:
- 100 mm
- usable length l₃:
- 37.4 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.2
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
11.95 mm - 14 mm
nominal diameter [in]
0.47 " - 0.551 "
pitch [mm]
1.75 mm
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
ZBGF-T
coolant supply
IKZ
helix direction
straight
clamping flat
HB
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TICN
shank diameter d₂
12 mm
length of cutting edge l₂
7 mm
OAL l₁
100 mm
usable length l₃
37.4 mm
flutes /number of ridges
4
diameter of milling part dF
9.2
clamping length l₄
45 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.