GF-H-R10-IKZ-HB-TiCN
solid carbide thread milling cutters
Article number GF927126.0100
Machining of internal threads.
Product features and benefits:
For hard machining from 55 HRC.Smooth milling operation thanks to flutes with 10° helix angle.Predrilled tap hole necessary.Size-dependent tool with corrected thread profile.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-H-R10
- coolant supply:
- IKZ
- helix direction:
- R10
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 8 mm
- OAL l₁:
- 63 mm
- length of cutting edge l₂:
- 15.691 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 36 mm
- diameter of milling part dF:
- 7.9
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-H-R10
- coolant supply:
- IKZ
- helix direction:
- R10
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 8 mm
- OAL l₁:
- 63 mm
- length of cutting edge l₂:
- 15.691 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 36 mm
- diameter of milling part dF:
- 7.9
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
9.95 mm - 12 mm
nominal diameter [in]
0.392 " - 0.472 "
pitch [mm]
1.5 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-H-R10
coolant supply
IKZ
helix direction
R10
clamping flat
HB
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TICN
shank diameter d₂
8 mm
OAL l₁
63 mm
length of cutting edge l₂
15.691 mm
flutes /number of ridges
5
clamping length l₄
36 mm
diameter of milling part dF
7.9
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.