InnoForm 2-H-SN-IKZ-PM-TIN-T26
machine cold-forming taps
Article number C523W700.0359
-
Hole type: through holeHole type: blind holeLead taper form C, lead taper length 2-3 threads
HSSE-PM cold-forming tap for applications in high-strength materials.
Product features and benefits:
Lubrication grooves to avoid cold pressure welding especially recommended for through-hole threads and horizontal machining.Short threaded part and special polygon shape for reduced torque.
International Material Comparison- thread symbol:
- MF
- nominal diameter d₁ [mm]:
- 16 mm
- pitch [mm]:
- 1.5 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- lead taper form:
- Form C
- Geometry:
- H
- Coating:
- TIN-T26
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 15 mm
- square ◘:
- 9 mm
- tap hole diameter:
- 15.35 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE-PM
Technical details
- thread symbol:
- MF
- nominal diameter d₁ [mm]:
- 16 mm
- pitch [mm]:
- 1.5 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- lead taper form:
- Form C
- Geometry:
- H
- Coating:
- TIN-T26
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 15 mm
- square ◘:
- 9 mm
- tap hole diameter:
- 15.35 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE-PM
thread symbol
MF
nominal diameter d₁ [mm]
16 mm
pitch [mm]
1.5 mm
Constructional design
DIN 2174
thread sense of rotation
right hand
coolant supply
IKZ
lead taper form
Form C
Geometry
H
Coating
TIN-T26
shank diameter d₂
12 mm
OAL l₁
100 mm
length of cutting edge l₂
15 mm
square ◘
9 mm
tap hole diameter
15.35 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE-PM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.