GF-Vario-Z-R15-IKZ-HA
solid carbide thread milling cutters
Article number GFB35701.5017
Machining of internal threads.
Product features and benefits:
Short machining time due to more flutes.Deep thread possible thanks to long thread part.Smooth milling operation thanks to flutes with 15° helix angle.Predrilled tap hole necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter [in]:
- 0.874 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- nominal diameter d₁ [mm]:
- 22.2 mm - 999 mm
- pitch [in]:
- 0.111 "
- pitch [mm]:
- 2.822 mm
- threads per inch:
- 9
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Vario-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 110 mm
- shank diameter d₂:
- 20 mm
- length of cutting edge l₂:
- 46.462 mm
- flutes /number of ridges:
- 6
- diameter of milling part dF:
- 18.9
- clamping length l₄:
- 50 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter [in]:
- 0.874 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- nominal diameter d₁ [mm]:
- 22.2 mm - 999 mm
- pitch [in]:
- 0.111 "
- pitch [mm]:
- 2.822 mm
- threads per inch:
- 9
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Vario-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 110 mm
- shank diameter d₂:
- 20 mm
- length of cutting edge l₂:
- 46.462 mm
- flutes /number of ridges:
- 6
- diameter of milling part dF:
- 18.9
- clamping length l₄:
- 50 mm
- cutting material:
- carbide
thread symbol
UN, UNC, UNEF, UNF, UNS
nominal diameter [in]
0.874 " - 39.331 "
nominal size
1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
nominal diameter d₁ [mm]
22.2 mm - 999 mm
pitch [in]
0.111 "
pitch [mm]
2.822 mm
threads per inch
9
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-Vario-Z-R15
coolant supply
IKZ
helix direction
R15
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
OAL l₁
110 mm
shank diameter d₂
20 mm
length of cutting edge l₂
46.462 mm
flutes /number of ridges
6
diameter of milling part dF
18.9
clamping length l₄
50 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.