SE-keg-nor-STEEL
round threading dies
Article number D0191000.4069
-
Chamfer length 1.5 threads
Round HSS thread cutting die for applications in steel materials and long-chipping materials.
Product features and benefits:
For cutting NPT/ NPTF threads (tapered pipe threads).
International Material Comparison- thread symbol:
- R
- nominal diameter d₁ [mm]:
- 9.73 mm
- nominal size:
- 1/8
- pitch [mm]:
- 0.91 mm
- pitch [in]:
- 0.036 "
- threads per inch:
- 28
- constructional design:
- similar DIN EN 22568
- thread sense of rotation:
- right hand
- surface quality:
- normal
- champfer lenght:
- 1,5 thread
- Geometry:
- STEEL
- tool body diameter:
- 30 mm
- width:
- 11 mm
- final position of die L:
- 8.1 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- Preparatory bolt diameter Dₐ min.:
- 9.43 mm
- Preparatory bolt diameter Dₐ max.:
- 9.53 mm
- cutting material:
- HSS
Technical details
- thread symbol:
- R
- nominal diameter d₁ [mm]:
- 9.73 mm
- nominal size:
- 1/8
- pitch [mm]:
- 0.91 mm
- pitch [in]:
- 0.036 "
- threads per inch:
- 28
- constructional design:
- similar DIN EN 22568
- thread sense of rotation:
- right hand
- surface quality:
- normal
- champfer lenght:
- 1,5 thread
- Geometry:
- STEEL
- tool body diameter:
- 30 mm
- width:
- 11 mm
- final position of die L:
- 8.1 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- Preparatory bolt diameter Dₐ min.:
- 9.43 mm
- Preparatory bolt diameter Dₐ max.:
- 9.53 mm
- cutting material:
- HSS
thread symbol
R
nominal diameter d₁ [mm]
9.73 mm
nominal size
1/8
pitch [mm]
0.91 mm
pitch [in]
0.036 "
threads per inch
28
constructional design
similar DIN EN 22568
thread sense of rotation
right hand
surface quality
normal
champfer lenght
1,5 thread
Geometry
STEEL
tool body diameter
30 mm
width
11 mm
final position of die L
8.1 mm
coolant-lubricant
thread cutting oil, thread cutting paste
Preparatory bolt diameter Dₐ min.
9.43 mm
Preparatory bolt diameter Dₐ max.
9.53 mm
cutting material
HSS
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.