HSS Shell End Mill
4050
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
HSS shell end mill, DIN 1880, for face and corner milling with large stock removal rates (roughing applications) in simple steel and cast iron materials as well as copper alloys.
Product features and benefits:
NR cutting edge profile with round chip dividers for high material removal and to prevent chip jams.Roughing geometry with low cutting forces.Tool clamping possible by means of longitudinal slot and transverse slot.
International Material Comparison- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 25 deg
Technical details
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 25 deg
cutting material
HSSE
category
Shell End Mill
tool interface
Bore with Keyway, Driving Slot
tool interface norm
DIN 138
coating
without coating
helix angle
25 deg