Clamping Mandrel
For clamping of hollow shafts.
Article number HD400056
-
Mounting position: horizontal
Clamping system SP
The clamping mandrel is designed for grinding the outer contour of the workpiece.
Functional description:
The clamping is initiated by a manually generated torque. The force is transmitted to the clamping sleeve (system SP) via a tilt ring and a clamping bolt. The clamping mandrel is equipped with a pendulum stop to compensate for axial run-out errors. The pendulum stop adapts to the flat face of the workpiece. The workpiece is also supported by a centre point on the machine side. The release of clamping is again initiated via a manually generated torque and is supported by an integrated pressure spring.
Advantages:
- no bending at the clamping mandrel due to inaccurate face at the left end of the workpiece thanks to oscillating end stop- slim design- alternative clamping in a partial circle or in a cylindrical bore possible only by replacing the clamping sleeve
- category:
- Clamping Mandrel
- machining:
- grinding
- workpiece:
- shaft
- industry:
- drive technology, engine
- clamping-Ø:
- 25,00 mm
- connection spindle side:
- MK Morse taper
- connection tailstock side:
- centering point
- clamping tool quick-changeable:
- yes
- fitting position:
- horizontal
- repeat accuracy at control workpiece :
- 0,006 mm
- transferable torque:
- 24 Nm
- outer-Ø:
- 75,00 mm
- overall length:
- 244,00 mm
- weight clamping device:
- 3,5 kg
- weight workpiece:
- 2,1 kg
- material workpiece:
- steel
- category:
- Clamping Mandrel
- machining:
- grinding
- workpiece:
- shaft
- industry:
- drive technology, engine
- clamping-Ø:
- 25,00 mm
- connection spindle side:
- MK Morse taper
- connection tailstock side:
- centering point
- clamping tool quick-changeable:
- yes
- fitting position:
- horizontal
- repeat accuracy at control workpiece :
- 0,006 mm
- transferable torque:
- 24 Nm
- outer-Ø:
- 75,00 mm
- overall length:
- 244,00 mm
- weight clamping device:
- 3,5 kg
- weight workpiece:
- 2,1 kg
- material workpiece:
- steel