Milling Technology - Cutters with assembly hole
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breakerSharp-edgedRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- V-Shaped Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Radius Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Spur Wheel Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
HSS shell end mill, DIN 1880, for face and corner milling with large stock removal rates (roughing applications) in simple steel and cast iron materials as well as copper alloys.
HSS shell end mill DIN 1880, for face and corner milling with low cutting depths (finishinging) in almost all steel materials and non-ferrous metals.
HSS circular saw blade acc. to DIN 138 / 885, coarse-toothed, for milling deep grooves, cut-off milling or cutting to length in steel and cast iron materials as well as short-chipping non-ferrous metals.
HSS prismatic milling cutter, DIN 138/ DIN 847, for milling prismatic notches or guides and chamfering operations in steel, cast iron or short-chipping non-ferrous materials.
HSS metal circular saw blade, DIN 138, fine-toothed, for milling grooves, cutting to length operations in steel and cast iron materials as well as short-chipping non-ferrous metals.
Slim HSS disc milling cutter, DIN 138/1834, with straight flutes for milling deep grooves, slotting and cutting to length steel and cast iron materials as well as short-chipping non-ferrous metals.
Carbide circular saw blade, fine-toothed, for milling grooves, cut-off milling or cutting to length in almost all steel materials and non-ferrous metals.
HSS disc milling cutter acc. to DIN 138 / 885, cross-toothed for milling deep grooves, cut-off milling or cutting to length in steel and cast iron materials as well as short-chipping non-ferrous metals.
HSS semi-round profile milling cutter, DIN 138/ DIN 855, for milling in steel materials, cast iron or short-chipping non-ferrous materials.
HSS form milling cutter DIN 138/ DIN 847, for milling of splines in single part process in steel materials, cast iron or short-chipping non-ferrous materials.