Milling Technology - Indexable milling cutters and inserts

256 suitable variants
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      Recommended ramping angle
      Holders for screw-in end mills

    Screw-in milling body for high-feed milling with Time-S4-Cut indexable inserts (IC 8.5).

    category:
    Time-S4-Cut
    version:
    Milling Body for Inserts
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      Recommended ramping angle
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for roughing and finishing applications with rhombic indexable inserts (IC 9.2).

    category:
    Rhombic
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM

    Time-S4-Cut carbide indexable insert (IC 8.5) for high-feed milling of 2D and 3D contours in low-alloy steel materials.

    cutting material:
    PE6
    category:
    Time-S4-Cut
    version:
    Indexable Insert
    coating:
    TIALN

    Rhombic carbide indexable insert (IC 4.6 / IC 9.2) for roughing and finishing of steel materials and hard materials.

    cutting material:
    KC2
    category:
    Rhombic
    chip former:
    0 deg
    version:
    Indexable Insert
    coating:
    TIALN
    • High precision corner radius for 3D operations
      Recommended feed directions of the respective cutters

    End milling body with carbide shank for finishing applications with torus inserts.

    category:
    Torus
    version:
    Milling Body for Inserts
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    internal coolant supply:
    ICR
    exchange precision:
    ±0,01 mm
    • Ball nose (full radius)
      Recommended feed directions of the respective cutters

    End milling body with carbide shank for finishing applications with ball nose inserts.

    category:
    Ball Nose, Circle Segment
    version:
    Milling Body for Inserts
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    internal coolant supply:
    ICR
    exchange precision:
    ±0,01 mm
    • Ball nose (full radius)

    Carbide ball nose insert for pre-finishing and HSC finishing in many materials.

    cutting material:
    KP1
    category:
    Ball Nose
    chip former:
    0 deg
    version:
    Exchangable Insert
    coating:
    TIALN

    Round carbide indexable insert (IC 8, 10, 12, 16) for roughing of steel materials.

    cutting material:
    PE3
    category:
    Round
    version:
    Indexable Insert
    coating:
    ALO
    • Ball nose (full radius)

    Carbide ball nose insert for pre-finishing and HSC finishing in many materials, in particular hardened steel materials up to 63 HRC.

    cutting material:
    KP1
    category:
    Ball Nose
    version:
    Exchangable Insert
    coating:
    TIALSIN
    • High precision corner radius for 3D operations

    Carbide torus insert for HSC pre-finishing and HSC finishing of 2D and 3D contours in steel materials, long-chipping copper alloys and hard materials.

    cutting material:
    KP1
    category:
    Torus
    chip former:
    20 deg
    version:
    Exchangable Insert
    coating:
    TIALSIN