Milling Technology - Cutters with assembly hole

708 suitable variants
    • Roughing end mill with round and coarse knuckle form profile.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters

    HSS shell end mill, DIN 1880, for face and shoulder milling with high material removal (roughing applications) in simple steel and cast materials as well as copper alloys.

    cutting material:
    HSSE
    category:
    Shell End Mill
    tool interface:
    Bore with Keyway, Driving Slot
    tool interface norm:
    DIN 138
    coating:
    TICN
    helix angle:
    25 deg
    • Finishing end mill without chip breaker for almost all materials.
      Sharp-edge (without bevelled edge)
      Recommended feed directions of the respective cutters

    HSS shell end mill, DIN 1880, for face and shoulder milling with low cutting depths (finishing applications) in almost all steel materials and non-ferrous metals.

    cutting material:
    HSSE
    category:
    Shell End Mill
    tool interface:
    Bore with Keyway, Driving Slot
    tool interface norm:
    DIN 138
    coating:
    TICN
    helix angle:
    25 deg
    • Finishing end mill without chip breaker for almost all materials.

    HSS side and face milling cutter, DIN 138/885, with coarse staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSSE
    category:
    Side and Face Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for almost all materials.

    HSS double-angle milling cutter, DIN 138/DIN 847, for milling prismatic notches or guides as well as chamfering in steel, cast iron or short-chipping non-ferrous materials.

    cutting material:
    HSS
    category:
    V-Shaped Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for hardened materials.

    HSS metal slitting saw, DIN 138, fine toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSS
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for hardened materials.

    Narrow HSS side and face milling cutter, DIN 138/1834, with straight toothing for milling deep slots, slotting, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSSE
    category:
    Side and Face Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for hardened materials.

    Carbide metal slitting saw, fine toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.

    cutting material:
    HM
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for hardened materials.

    HSS side and face milling cutter, DIN 138/885, with staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSSE
    category:
    Side and Face Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for almost all materials.

    HSS radius cutter, DIN 138/DIN 855, for milling in steel, cast iron or short-chipping non-ferrous materials.

    cutting material:
    HSSE
    category:
    Radius Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138
    • Finishing end mill without chip breaker for almost all materials.

    HSS involute gear cutter, DIN 138/DIN 847, for milling spur gear teeth in the single indexing method in steel, cast iron or short-chipping non-ferrous materials.

    cutting material:
    HSSE
    category:
    Spur Wheel Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138