Stationary clamping device

For clamping of planetary gear carrier covers.

Article number HD400065

  • Mounting position: horizontal
    Mounting position: vertically upright
    Clamping system SM
H400065_Spannmittel
H400065_Spannmittel_Schnitt
H400065_Werkstueck
    H400065_Spannmittel
    H400065_Spannmittel_Schnitt
    H400065_Werkstueck
    3D

The stationary clamping device is designed for a milling operation of the workpiece.

Functional description:

The clamping for the centring of the workpiece is introduced hydraulically via a clamping bolt and a collet (system SZ). The clamping of the diaphragm is also initiated hydraulically (System SM). The three clamping segments of the diaphragm are pushed against the workpiece and clamp it on the outer diameter. In addition, the workpiece is hydraulically aligned in rotation via a lateral alignment unit. It moves inwards and aligns the workpiece via two inclined pressure bolts in a predefined milled opening. The release of clamping for all actuations is initiated hydraulically.

Advantages:

- very high transmittable torque due to joint clamping in the bore and on the outer contour of the workpiece
- low-deformation clamping of a relatively thin-walled area in the component despite high clamping forces
- resistant to soiling thanks to diaphragm design
- generous clearances spaces between adjacent clamping jaws enable robust design of the milling tools
- automatic rotation alignment without backlash in one of the gaps on the workpiece

category:
Stationary clamping device
machining:
drill, milling
workpiece:
housing
industry:
transmission
clamping-Ø:
101,00 mm / 227,00 mm
connection spindle side:
face location
airflow control device:
direct
sealing air:
yes
fitting position:
horizontal, vertically upright
repeat accuracy at control workpiece :
0,020 mm
transferable torque:
1.000 Nm
total width:
400,00 mm
total length:
610,00 mm
weight clamping device:
150 kg
weight workpiece:
2,7 kg
material workpiece:
high-alloy steel
Technical details
category:
Stationary clamping device
machining:
drill, milling
workpiece:
housing
industry:
transmission
clamping-Ø:
101,00 mm / 227,00 mm
connection spindle side:
face location
airflow control device:
direct
sealing air:
yes
fitting position:
horizontal, vertically upright
repeat accuracy at control workpiece :
0,020 mm
transferable torque:
1.000 Nm
total width:
400,00 mm
total length:
610,00 mm
weight clamping device:
150 kg
weight workpiece:
2,7 kg
material workpiece:
high-alloy steel
category
Stationary clamping device
machining
drill, milling
workpiece
housing
industry
transmission
clamping-Ø
101,00 mm / 227,00 mm
connection spindle side
face location
airflow control device
direct
sealing air
yes
fitting position
horizontal, vertically upright
repeat accuracy at control workpiece
0,020 mm
transferable torque
1.000 Nm
total width
400,00 mm
total length
610,00 mm
weight clamping device
150 kg
weight workpiece
2,7 kg
material workpiece
high-alloy steel
show all

Downloads to the product

There are no downloads for this product.