Clamping Chuck

For clamping of turbocharger housings.

Article number HD400072

  • Mounting position: vertically upright
    Clamping system SM

The clamping chuck is designed for a drilling and milling operation of the workpiece.

Functional description:

The pre-centring of the workpiece is done via the internal tension of the diaphragm (system SM). The diaphragm cenres the workpiece by means of hydraulic pressure on an integrated piston. The three clamping segments of the diaphragm are pushed against the workpiece and clamp it on the outer diameter. In addition, the workpiece is hydraulically clamped flat via a lateral block cylinder with lever arm. It moves downwards and presses a clamping plate towards the front surface of the workpiece. The release of the face clamping and the centring are carried out simultaneously by hydraulic pressure.

Advantages:

- Resistant to soiling thanks to diaphragm design
- Clamping jaws with quick change system
- The end stop is equipped with air system control
- Excellent holding force of the clamping device thanks to the additional face clamping with a lateral lever arm

category:
Clamping Chuck
machining:
drill, milling
workpiece:
housing
industry:
engine
clamping-Ø:
110,00 mm
connection spindle side:
face location
airflow control device:
direct
fitting position:
vertically upright
repeat accuracy at control workpiece :
0,010 mm
transferable torque:
20 Nm
outer-Ø:
276,00 mm
overall length:
303,00 mm
weight clamping device:
55 kg
Technical details
category:
Clamping Chuck
machining:
drill, milling
workpiece:
housing
industry:
engine
clamping-Ø:
110,00 mm
connection spindle side:
face location
airflow control device:
direct
fitting position:
vertically upright
repeat accuracy at control workpiece :
0,010 mm
transferable torque:
20 Nm
outer-Ø:
276,00 mm
overall length:
303,00 mm
weight clamping device:
55 kg
category
Clamping Chuck
machining
drill, milling
workpiece
housing
industry
engine
clamping-Ø
110,00 mm
connection spindle side
face location
airflow control device
direct
fitting position
vertically upright
repeat accuracy at control workpiece
0,010 mm
transferable torque
20 Nm
outer-Ø
276,00 mm
overall length
303,00 mm
weight clamping device
55 kg