Milling Technology - End mill cutters
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight Shank with assembled stop ring
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- ASME
- coating:
- ALCR
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
Alu-Cut carbide end mill in long design for roughing and finishing in wrought aluminium alloys and copper alloys.
Alu-Cut carbide end mill with Weldon flat and long design for roughing and finishing in wrought aluminium alloys and copper alloys.
Dental carbide ball nose end mill for roughing, finishing machining in PMMA/PEEK and wax.
Dental carbide ball nose end mill for roughing, finishing machining in PMMA/PEEK and wax.
Dental carbide ball nose end mill with brass stop ring for roughing, finishing machining in wax and PMMA/PEEK.
Alu-Cut carbide end mill with Weldon flat and long design for roughing and finishing in wrought aluminium alloys.
Alu-Cut carbide end mill in long design for roughing and finishing in wrought aluminium alloys.
Alu-Cut carbide ball nose end mill for finishing in wrought aluminium alloys and plastics.
TOP-Cut VAR carbide end mill with 4 flute design with clamping flat for roughing and finishing in almost all materials.
TOP-Cut VAR carbide end mill with 4 flute design with clamping flat for roughing and finishing in almost all materials.