Milling Technology - End mill cutters
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
Solid Carbide Ball Nose End Mill Hard-Cut in short design (3xD) for finishing in hard materials.
Solid Carbide Ball Nose End Mill Hard-Cut in long design (5xD) for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in short design (3xD) for finishing in hard materials.
Solid Carbide Ball Nose End Mill Hard-Cut in extra long design (10xD) for finishing in hard materials.
Solid Carbide Ball Nose End Mill Hard-Cut in extra long design (12xD) for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in long design (5xD) and with 4 flutes for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in short design (3xD) and with 4 flutes for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in extra long design (8xD) and with 4 flutes for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in extra long design (10xD) for finishing in hard materials.
Solid Carbide Torus End Mill Hard-Cut in extra long design (12xD) for finishing in hard materials.