Technique de fraisage - Fraises à plaquettes

255 Variantes équivalentes
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for screw-in end mills

    Corps de fraise à visser pour fraisage grande avance avec plaquettes Time-S4-Cut (IC 8,5).

    category:
    Time-S4-Cut
    version:
    Milling Body for Inserts
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour ébauche et finition avec plaquettes rhombiques (IC 9,2).

    category:
    Rhombic
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM

    Plaquette carbure Time-S-Cut (IC 8,5) pour fraisage grande avance contour 2D- 3D dans aciers faiblement alliés.

    cutting material:
    PE6
    category:
    Time-S4-Cut
    version:
    Indexable Insert
    coating:
    TIALN
    • High precision corner radius for 3D-operations

    Plaquette carbure torique pour HSC-semi-finition et finition HSC contour 2D- 3D dans aciers et alliages de cuivre copeaux longs.

    cutting material:
    KP1
    category:
    Torus
    chip former:
    20 deg
    version:
    Exchangable Insert
    coating:
    TIALN
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour ébauche et finition avec plaquettes rondes (IC 16).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour ébauche et finition avec plaquettes rondes (IC 10).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour ébauche et finition avec plaquettes rondes (IC 12).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour fraisage grande avance avec plaquettes Time-S-Cut (IC 12,5).

    category:
    Time-S-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour fraisage grande avance avec plaquettes Time-S4-Cut (IC 8,5).

    category:
    Time-S4-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Corps de fraise démontable, DIN 138, pour fraisage grande avance avec plaquettes Time-S-Cut (IC 8).

    category:
    Time-S-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR