Mandrins expansibles de serrage - Special solutions
-
Mounting position: horizontal
Mounting position: vertically suspended
Clamping system SG
- Catégorie:
- Mandrin de serrage
- Usinage:
- Taillage denture
- Pièce à usiner:
- Pignon
- Lieu d' implantation:
- horizontal, vertical avec accroche
-
Mounting position: vertically upright
Clamping system SM
- Catégorie:
- Dispositif de serrage stationn
- Usinage:
- Perçage, Fraisage
- Pièce à usiner:
- Pignon
- Lieu d' implantation:
- vertical droit
-
Mounting position: vertically suspended
Clamping system SM
- Catégorie:
- Mandrin de serrage
- Usinage:
- Taillage denture
- Pièce à usiner:
- Pignon
- Lieu d' implantation:
- vertical avec accroche
-
Mounting position: horizontal
Clamping system SZ
- Catégorie:
- Mandrin de serrage
- Usinage:
- Affutage
- Pièce à usiner:
- Pignon
- Lieu d' implantation:
- horizontal
-
Mounting position: horizontal with tailstock
Clamping system SG
- Catégorie:
- Mandrin expansible
- Usinage:
- Perçage, Tournage, Fraisage
- Pièce à usiner:
- boîte
- Lieu d' implantation:
- horizontal contrepointe
-
Mounting position: vertically upright with tailstock
Clamping system SG
Clamping system SZ
- Catégorie:
- Mandrin de serrage
- Usinage:
- Souder
- Pièce à usiner:
- Roue, Arbre
- Lieu d' implantation:
- vertical droit cont
-
Mounting position: vertically upright with tailstock
Clamping system SZ
- Catégorie:
- Mandrin expansible
- Usinage:
- Taillage denture
- Pièce à usiner:
- Pignon, Roue
- Lieu d' implantation:
- vertical droit cont
-
Mounting position: vertically upright with tailstock
Clamping system SG
Clamping system SZ
- Catégorie:
- Mandrin expansible
- Usinage:
- Taillage denture
- Pièce à usiner:
- carter
- Lieu d' implantation:
- vertical droit cont
-
Mounting position: vertically suspended
Clamping system SG
- Catégorie:
- Mandrin de serrage
- Usinage:
- Fraisage, Tournage
- Pièce à usiner:
- carter, Arbre
- Lieu d' implantation:
- vertical avec accroche
-
Mounting position: vertically upright with tailstock
Clamping system SZ
- Catégorie:
- Mandrin expansible
- Usinage:
- Fraisage, Perçage
- Pièce à usiner:
- Roue
- Lieu d' implantation:
- vertical droit cont
The clamping chuck is designed for a gear milling operation on the tapered outer diameter of the workpiece.
The stationary clamping device is designed for a drilling and milling operation of the workpiece.
The clamping device is designed for skiving the internal gearing on the workpiece.
The clamping device is designed for grinding the inner and outer contour of the workpiece.
The clamping mandrel is designed for a turning operation of the outer contour, as well as for milling and drilling the workpiece.
The clamping chuck with pressure unit is designed for an electron beam welding process in vacuum.
The clamping mandrel is designed for grinding the external gearing of the workpiece.
The clamping mandrel is designed for gear hobbing the external gearing of the workpiece.
The clamping chuck is designed for a turning and milling operation of the workpiece.
The clamping mandrel is designed for milling the outer contour of the workpiece.