GF-keg-IKZ-SD20-Z5-HA-TiCN
solid carbide thread milling cutters for tapered threads
Article number GF173756.9562
Machining of tapered internal threads.
Product features and benefits:
Partly across all dimensions.Cylindrical or preferably tapered pre-drilled tap hole necessary.Pitch-dependent tool with corrected thread profile.
International Material Comparison- thread symbol:
- RC
- nominal diameter d₁ [mm]:
- 32.5 mm - 50 mm
- nominal diameter [in]:
- 1.28 " - 1.969 "
- nominal size:
- 1, 1 1/2, 1 1/4
- pitch [mm]:
- 2.309 mm
- pitch [in]:
- 0.091 "
- threads per inch:
- 11
- thread orientation:
- internal
- type:
- GF-KEG
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 24.264 mm
- OAL l₁:
- 90 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 19.6
- clamping length l₄:
- 50 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- RC
- nominal diameter d₁ [mm]:
- 32.5 mm - 50 mm
- nominal diameter [in]:
- 1.28 " - 1.969 "
- nominal size:
- 1, 1 1/2, 1 1/4
- pitch [mm]:
- 2.309 mm
- pitch [in]:
- 0.091 "
- threads per inch:
- 11
- thread orientation:
- internal
- type:
- GF-KEG
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 24.264 mm
- OAL l₁:
- 90 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 19.6
- clamping length l₄:
- 50 mm
- cutting material:
- carbide
thread symbol
RC
nominal diameter d₁ [mm]
32.5 mm - 50 mm
nominal diameter [in]
1.28 " - 1.969 "
nominal size
1, 1 1/2, 1 1/4
pitch [mm]
2.309 mm
pitch [in]
0.091 "
threads per inch
11
thread orientation
internal
type
GF-KEG
basic version
GF - thread milling cutter
coolant supply
IKZ
clamping flat
HA
helix direction
straight
shank standard
DIN 6535
Coating
TICN
shank diameter d₂
20 mm
direction of tool rotation
RH
length of cutting edge l₂
24.264 mm
OAL l₁
90 mm
flutes /number of ridges
5
diameter of milling part dF
19.6
clamping length l₄
50 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.