ZBGF-H-2xD-IKZ-HE-TiAlN-T3
solid carbide cicular drill thread mills
Article number GF733508.0100
Machining of tap hole and internal thread.
Product features and benefits:
For workpiece material up to 44 HRCPredrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-HCUT
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HE
- shank standard:
- DIN 6535
- direction of tool rotation:
- LH
- Coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- length of cutting edge l₂:
- 6 mm
- OAL l₁:
- 76 mm
- usable length l₃:
- 25 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 7.75
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-HCUT
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HE
- shank standard:
- DIN 6535
- direction of tool rotation:
- LH
- Coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- length of cutting edge l₂:
- 6 mm
- OAL l₁:
- 76 mm
- usable length l₃:
- 25 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 7.75
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
9.95 mm - 12 mm
nominal diameter [in]
0.392 " - 0.472 "
pitch [mm]
1.5 mm
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
ZBGF-HCUT
coolant supply
IKZ
helix direction
straight
clamping flat
HE
shank standard
DIN 6535
direction of tool rotation
LH
Coating
TIALN-T3
shank diameter d₂
10 mm
length of cutting edge l₂
6 mm
OAL l₁
76 mm
usable length l₃
25 mm
flutes /number of ridges
4
diameter of milling part dF
7.75
clamping length l₄
40 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.