Clamping Mandrel
For clamping telescopic sights (main tubes).
Article number HD400002
-
Mounting position: horizontal with tailstockClamping system SG
The clamping mandrel is designed for a turning operation of the outer contour, as well as for milling and drilling the workpiece.
Functional description:
Clamping is initiated via a drawbar on the machine side and is transmitted to the clamping bush (system SG) via a clamping bolt. The workpiece is supported via a moving centring head on the tailstock side.
Advantages:
- low-deformation clamping of very thin-walled components- uniform distribution of the clamping force over the entire clamping length
- category:
- Clamping Mandrel
- machining:
- drill, turning, milling
- workpiece:
- bush
- industry:
- optics & micro
- clamping-Ø:
- 36,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- cylinder ≤ 170
- fitting position:
- horizontally with tailstock
- repeat accuracy at control workpiece :
- 0,008 mm
- transferable torque:
- 27,5 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 236,00 mm
- weight clamping device:
- 14 kg
Technical details
- category:
- Clamping Mandrel
- machining:
- drill, turning, milling
- workpiece:
- bush
- industry:
- optics & micro
- clamping-Ø:
- 36,00 mm
- connection spindle side:
- short taper 6
- connection tailstock side:
- cylinder ≤ 170
- fitting position:
- horizontally with tailstock
- repeat accuracy at control workpiece :
- 0,008 mm
- transferable torque:
- 27,5 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 236,00 mm
- weight clamping device:
- 14 kg
category
Clamping Mandrel
machining
drill, turning, milling
workpiece
bush
industry
optics & micro
clamping-Ø
36,00 mm
connection spindle side
short taper 6
connection tailstock side
cylinder ≤ 170
fitting position
horizontally with tailstock
repeat accuracy at control workpiece
0,008 mm
transferable torque
27,5 Nm
outer-Ø
190,00 mm
overall length
236,00 mm
weight clamping device
14 kg