Clamping Mandrel
For clamping impeller wheels.
Article number HD400004
-
Mounting position: horizontalClamping system SG
The clamping mandrel is designed for milling the outer contour, as well as for a turning operation of the flat faces of the workpiece.
Functional description:
Clamping is initiated on the spindle side via a drawbar on the machine side and is transmitted to the two clamping bushes (system SG) via a clamping bolt. These clamping bushes are decoupled by an intermediate bush and can expand differently. Inaccuracies in the bore can be compensated by clamping in two planes.
Advantages:
- Compensation of bore inaccuracies by means of two decoupled clamping bushes- Machining of different workpiece lengths thanks to quick-change end stops
- category:
- Clamping Mandrel
- machining:
- turning, milling
- workpiece:
- wheel
- industry:
- pump
- clamping-Ø:
- 60,00 mm
- connection spindle side:
- cylinder ≤ 300
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 150 Nm
- outer-Ø:
- 320,00 mm
- overall length:
- 320,00 mm
- weight clamping device:
- 36 kg
- weight workpiece:
- 28 kg
- material workpiece:
- steel
Technical details
- category:
- Clamping Mandrel
- machining:
- turning, milling
- workpiece:
- wheel
- industry:
- pump
- clamping-Ø:
- 60,00 mm
- connection spindle side:
- cylinder ≤ 300
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 150 Nm
- outer-Ø:
- 320,00 mm
- overall length:
- 320,00 mm
- weight clamping device:
- 36 kg
- weight workpiece:
- 28 kg
- material workpiece:
- steel
category
Clamping Mandrel
machining
turning, milling
workpiece
wheel
industry
pump
clamping-Ø
60,00 mm
connection spindle side
cylinder ≤ 300
fitting position
horizontal
concentricity at control workpiece
0,010 mm
transferable torque
150 Nm
outer-Ø
320,00 mm
overall length
320,00 mm
weight clamping device
36 kg
weight workpiece
28 kg
material workpiece
steel