ZBGF-H-2xD-IKZ-HA-TiAlN-T3
solid carbide cicular drill thread mills
Article number GF733808.0080
Machining of tap hole and internal thread.
Product features and benefits:
For workpiece material up to 44 HRCPredrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 7.95 mm - 10 mm
- nominal diameter [in]:
- 0.313 " - 0.394 "
- pitch [mm]:
- 1.25 mm
- thread orientation:
- internal
- type:
- ZBGF-HCUT
- basic version:
- ZBGF - circular drill thread mill
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- direction of tool rotation:
- LH
- length of cutting edge l₂:
- 5 mm
- OAL l₁:
- 71 mm
- usable length l₃:
- 19 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 6.2
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 7.95 mm - 10 mm
- nominal diameter [in]:
- 0.313 " - 0.394 "
- pitch [mm]:
- 1.25 mm
- thread orientation:
- internal
- type:
- ZBGF-HCUT
- basic version:
- ZBGF - circular drill thread mill
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- direction of tool rotation:
- LH
- length of cutting edge l₂:
- 5 mm
- OAL l₁:
- 71 mm
- usable length l₃:
- 19 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 6.2
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
7.95 mm - 10 mm
nominal diameter [in]
0.313 " - 0.394 "
pitch [mm]
1.25 mm
thread orientation
internal
type
ZBGF-HCUT
basic version
ZBGF - circular drill thread mill
coolant supply
IKZ
clamping flat
HA
helix direction
straight
shank standard
DIN 6535
Coating
TIALN-T3
shank diameter d₂
10 mm
direction of tool rotation
LH
length of cutting edge l₂
5 mm
OAL l₁
71 mm
usable length l₃
19 mm
flutes /number of ridges
4
diameter of milling part dF
6.2
clamping length l₄
40 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.