GF-Z-R15-IKZ-HA
solid carbide thread milling cutters for internal threads
Article number GF165981.9516
Machining of internal threads.
Product features and benefits:
Short machining time due to more flutes.Deep thread possible thanks to long thread part.Smooth milling operation thanks to flutes with 15° helix angle.Predrilled tap hole necessary.Pitch-dependent.Cross-dimensional.For internal threads the diameter of the end mill should be smaller than 2/3 or 3/4 of the thread diameter.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- pitch [mm]:
- 2 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 90 mm
- length of cutting edge l₂:
- 32.876 mm
- flutes /number of ridges:
- 6
- clamping length l₄:
- 48 mm
- diameter of milling part dF:
- 15.9
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- pitch [mm]:
- 2 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 90 mm
- length of cutting edge l₂:
- 32.876 mm
- flutes /number of ridges:
- 6
- clamping length l₄:
- 48 mm
- diameter of milling part dF:
- 15.9
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
22 mm - 999 mm
nominal diameter [in]
0.866 " - 39.331 "
pitch [mm]
2 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-Z-R15
coolant supply
IKZ
helix direction
R15
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
shank diameter d₂
16 mm
OAL l₁
90 mm
length of cutting edge l₂
32.876 mm
flutes /number of ridges
6
clamping length l₄
48 mm
diameter of milling part dF
15.9
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.