GSF-2xD-HA
solid carbide thread milling cutters with countersinking step
Article number GF313701.0030
Machining of countersinking bevel and internal thread.
Product features and benefits:
Tool with straight flutes.Predrilled tap hole necessary.Size-dependent tool with corrected thread profile.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 2.95 mm - 4 mm
- nominal diameter [in]:
- 0.116 " - 0.157 "
- pitch [mm]:
- 0.5 mm
- thread orientation:
- internal
- basic version:
- GSF - thread milling cutter with countersinking step
- type:
- GSF
- coolant supply:
- without
- helix direction:
- straight
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- shank diameter d₂:
- 4 mm
- OAL l₁:
- 42 mm
- length of cutting edge l₂:
- 6.239 mm
- countersinking depth lS:
- 6.47 mm
- countersinking diam. dS:
- 3.2 mm
- flutes /number of ridges:
- 3
- clamping length l₄:
- 28 mm
- diameter of milling part dF:
- 2.4
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 2.95 mm - 4 mm
- nominal diameter [in]:
- 0.116 " - 0.157 "
- pitch [mm]:
- 0.5 mm
- thread orientation:
- internal
- basic version:
- GSF - thread milling cutter with countersinking step
- type:
- GSF
- coolant supply:
- without
- helix direction:
- straight
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- shank diameter d₂:
- 4 mm
- OAL l₁:
- 42 mm
- length of cutting edge l₂:
- 6.239 mm
- countersinking depth lS:
- 6.47 mm
- countersinking diam. dS:
- 3.2 mm
- flutes /number of ridges:
- 3
- clamping length l₄:
- 28 mm
- diameter of milling part dF:
- 2.4
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
2.95 mm - 4 mm
nominal diameter [in]
0.116 " - 0.157 "
pitch [mm]
0.5 mm
thread orientation
internal
basic version
GSF - thread milling cutter with countersinking step
type
GSF
coolant supply
without
helix direction
straight
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
shank diameter d₂
4 mm
OAL l₁
42 mm
length of cutting edge l₂
6.239 mm
countersinking depth lS
6.47 mm
countersinking diam. dS
3.2 mm
flutes /number of ridges
3
clamping length l₄
28 mm
diameter of milling part dF
2.4
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.