Milling Technology - End mill cutters
-
_Web_Typ_N.svg)
without chip breaker
_Web_Stirnkontur_Kantenbruch.svg)
Corner protection chamfer (bevelled edge) for stabilisation of the edge
_Web_Vorschub_radial-diagonal.svg)
Recommended feed directions of the respective cutters
_Web_Rampenwinkel_3-5.svg)
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breaker
_Web_Stirnkontur_Eckenradius.svg)
Corner radius for the stabilisation of the cutting edge
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
_Web_Typ_NR_fein.svg)
with round, fine chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg
-
with round, fine chip breaker
_Web_Stirnkontur_R3D.svg)
Radius to be programmed in CAM
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill, High Feed Cutter
- version:
- Corner Radius (Duplex)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
_Web_Typ_NF_fein.svg)
with flat, fine chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
with flat, fine chip breaker
Corner radius for the stabilisation of the cutting edge
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
_Web_Typ_W.svg)
without chip breaker
Corner radius for the stabilisation of the cutting edge
_Web_Vorschub_axial-radial-diagonal.svg)
Recommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 38-40 deg
-
_Web_Typ_WR_grob.svg)
with round, coarse chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
Recommended feed directions of the respective cutters
Recommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
_Web_Typ_H.svg)
without chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
_Web_Vorschub_radial.svg)
Recommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 50 deg
-
without chip breaker
_Web_Stirnkontur_Torus.svg)
High precision corner radius for 3D operations
Recommended feed directions of the respective cutters
_Web_Schneidenlaenge_3xD.svg)
Possible axial depth
_Web_Rampenwinkel_1-3.svg)
Recommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
_1998A.jpg)
TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.
_2698A.jpg)
TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.
_2869A.jpg)
Multi-Cut carbide end mill in long design, with lateral driving flat and short flute length for high-performance roughing in many materials.
_2614AZ.jpg)
Multi-Cut Duplex carbide end mill in long design for high-performance roughing in almost all materials.
_2647TZ.jpg)
TiNox-Cut carbide end mill with lateral driving flat for roughing operations in materials that are difficult to machine.
Solid Carbide End Mill TiNox-Cut
2658TZ
_2658TZ.jpg)
TiNox-Cut carbide end mill in extra long design for roughing operations in materials that are difficult to machine.
_2547K.jpg)
Alu-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in wrought aluminium alloys and copper alloys.
_2548K.jpg)
Alu-Cut carbide end mill in long design for roughing in wrought aluminium alloys and copper alloys.
_1828A.jpg)
Hard-Cut carbide end mill in extra long design for finishing in high-strength materials up to 66 HRC.
_3874A.jpg)
Carbide torus end mill Hard-Cut with 4 flutes in short design (3xD) for finishing applications in hardened workpiece materials.