Milling Technology - Cutters with assembly hole
708 suitable variants
-
_Web_Typ_NR_grob.svg)
with round, coarse chip breaker
_Web_Stirnkontur_Kantenbruch.svg)
Corner protection chamfer (bevelled edge) for stabilisation of the edge
_Web_Vorschub_radial.svg)
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
_Web_Typ_N.svg)
without chip breaker
_Web_Stirnkontur_scharfkantig.svg)
Sharp-edged
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- V-Shaped Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
_Web_Typ_H.svg)
without chip breaker
- cutting material:
- HSS
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Radius Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Spur Wheel Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
_4050C.jpg)
_4010C.jpg)
_4410.jpg)
_4660.jpg)
_4500.jpg)
_4471.jpg)
_4505.jpg)
_4435.jpg)
_4640.jpg)
_5500.jpg)