Clamping Mandrel
For clamping rotors of an X-ray device.
Article number HD400013
-
Mounting position: horizontalClamping system SG
The clamping mandrel is designed for turning the outer contour of the workpiece.
Functional description:
Clamping is initiated via a draw bar on the machine side and is passed on to the clamping bolt and the clamping bush (system SG) via a quick-change connection. An integrated disk spring assembly serves to reduce the force between the mandrel and the machine. The workpiece lies flat on three fixed contact surfaces during clamping.
Advantages:
- uniform distribution of the clamping force over the entire clamping length- integrated force reduction- three fixed contact surfaces provide optimum workpiece support
- category:
- Clamping Mandrel
- machining:
- milling, turning
- workpiece:
- rotor
- industry:
- medical technology
- clamping-Ø:
- 42,00 mm - 56,00 mm
- connection spindle side:
- cylinder ≤ 140
- clamping tool quick-changeable:
- yes
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 32 Nm
- outer-Ø:
- 170,00 mm
- overall length:
- 430,00 mm
- weight clamping device:
- 30 kg
- weight workpiece:
- 0,4 kg
- material workpiece:
- copper
Technical details
- category:
- Clamping Mandrel
- machining:
- milling, turning
- workpiece:
- rotor
- industry:
- medical technology
- clamping-Ø:
- 42,00 mm - 56,00 mm
- connection spindle side:
- cylinder ≤ 140
- clamping tool quick-changeable:
- yes
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,010 mm
- transferable torque:
- 32 Nm
- outer-Ø:
- 170,00 mm
- overall length:
- 430,00 mm
- weight clamping device:
- 30 kg
- weight workpiece:
- 0,4 kg
- material workpiece:
- copper
category
Clamping Mandrel
machining
milling, turning
workpiece
rotor
industry
medical technology
clamping-Ø
42,00 mm - 56,00 mm
connection spindle side
cylinder ≤ 140
clamping tool quick-changeable
yes
fitting position
horizontal
concentricity at control workpiece
0,010 mm
transferable torque
32 Nm
outer-Ø
170,00 mm
overall length
430,00 mm
weight clamping device
30 kg
weight workpiece
0,4 kg
material workpiece
copper