Die-B-lapped-VA-D16/4holes

Round HSSE thread cutting die for universal application in stainless steel and steel materials.

Lapped version for improved thread surfaces.

Technical details

constructional design

DIN EN 22568

champfer lenght

2 thread

Geometry

coolant-lubricant

emulsion, thread cutting oil, thread cutting paste

cutting material

HSSE

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N4.2 Thermoplastics (long-chipping) No results found

Unit	Millimeter Inch

SE-B-gel-VA