Return

ZGF-2xD-HB-TiCN

solid carbide circular thread mills

Article number GF253106.0050

Possible thread depth

Machining of internal thread

Product features and benefits:

From thread size M1
pre-drilled taphole necessary
tool for several dimensions with corrected thread profile
partly independant of pitch

International material comparison

Details

thread symbol:: M, MF, UN, UNC, UNEF, UNF, UNS
nominal diameter d₁ [mm]:: 4.95 mm - 999 mm
nominal diameter [in]:: 0.195 " - 39.331 "
nominal size:: #12, 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 1/4, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 3/8, 4, 5/16, 5/8, 7/16, 7/8, 9/16
pitch [mm]:: 0.3 mm - 1 mm
pitch [in]:: 0.012 " - 0.039 "
threads per inch:: 28,32,36,40,44,48,56,64,72,80
thread orientation:: internal
basic version:: ZGF - circular thread milling cutter
type:: ZGF
coolant supply:: without
helix direction:: straight
clamping flat:: HB
shank standard:: DIN 6535
coating:: TICN
shank diameter d₂:: 6 mm
OAL l₁:: 55 mm
length of cutting edge l₂:: 1 mm
usable length l₃:: 14 mm
flutes /number of ridges:: 4
length of shank:: 36 mm
diameter of milling part dF:: 4
cutting material:: carbide

Technical details

thread symbol:: M, MF, UN, UNC, UNEF, UNF, UNS
nominal diameter d₁ [mm]:: 4.95 mm - 999 mm
nominal diameter [in]:: 0.195 " - 39.331 "
nominal size:: #12, 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 1/4, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 3/8, 4, 5/16, 5/8, 7/16, 7/8, 9/16
pitch [mm]:: 0.3 mm - 1 mm
pitch [in]:: 0.012 " - 0.039 "
threads per inch:: 28,32,36,40,44,48,56,64,72,80
thread orientation:: internal
basic version:: ZGF - circular thread milling cutter
type:: ZGF
coolant supply:: without
helix direction:: straight
clamping flat:: HB
shank standard:: DIN 6535
coating:: TICN
shank diameter d₂:: 6 mm
OAL l₁:: 55 mm
length of cutting edge l₂:: 1 mm
usable length l₃:: 14 mm
flutes /number of ridges:: 4
length of shank:: 36 mm
diameter of milling part dF:: 4
cutting material:: carbide

thread symbol

M, MF, UN, UNC, UNEF, UNF, UNS

nominal diameter d₁ [mm]

4.95 mm - 999 mm

nominal diameter [in]

0.195 " - 39.331 "

nominal size

#12, 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 1/4, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 3/8, 4, 5/16, 5/8, 7/16, 7/8, 9/16

pitch [mm]

0.3 mm - 1 mm

pitch [in]

0.012 " - 0.039 "

threads per inch

28,32,36,40,44,48,56,64,72,80

thread orientation

internal

basic version

ZGF - circular thread milling cutter

type

ZGF

coolant supply

without

helix direction

straight

clamping flat

shank standard

DIN 6535

coating

TICN

shank diameter d₂

6 mm

OAL l₁

55 mm

length of cutting edge l₂

1 mm

usable length l₃

14 mm

flutes /number of ridges

length of shank

36 mm

diameter of milling part dF

cutting material

carbide

Cutting Values

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N1.6 Aluminium cast alloys 12% < Si <= 17% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium wrought alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N4.3 Fibre-reinforced synthetics (fibre content <= 30%) N4.4 Fibre-reinforced synthetics (fibre content > 30%) N5.1 Graphite N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found Hard materials Search for value H1.1 High strength steels, hardened steels, hard castings 44 – 50 HRC H1.2 High strength steels, hardened steels, hard castings 50 – 55 HRC No results found

Unit	Millimeter Inch

Downloads to the product

2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active

Download all files