HSS End Mill TOP-Cut
1006
Article number 1006.044 | EAN 4037753035849
-
Unit of measurement: metricwithout chip breakerSharp-edgedRecommended feed directions of the respective cutters
HSS end mill Top-Cut, DIN 844, in long design, for finishing operations in almost all steel materials and non-ferrous metals.
Product features and benefits:
N-cutting edge profile for smooth surfaces.Sharp-edged design for universal use, wide range of dimensions, centre-cutting up to Ø 28 mm.
International Material Comparison- cutting diameter Ød₁ [mm]:
- 44 mm
- cutting tolerance:
- k10
- cutting length l₂ [mm]:
- 125 mm
- neck length l₃ [mm]:
- 142 mm
- overall length l₁:
- 217 mm
- neck diameter Ød₃:
- 38 mm
- shank diameter Ød₂ [mm]:
- 40 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 8
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Sharp-Edged)
- product line:
- FRANKEN TOP-Cut
- tool interface:
- straight shank
- tool interface norm:
- DIN 1835
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
- note:
- feed direction only radial
Technical details
- cutting diameter Ød₁ [mm]:
- 44 mm
- cutting tolerance:
- k10
- cutting length l₂ [mm]:
- 125 mm
- neck length l₃ [mm]:
- 142 mm
- overall length l₁:
- 217 mm
- neck diameter Ød₃:
- 38 mm
- shank diameter Ød₂ [mm]:
- 40 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 8
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Sharp-Edged)
- product line:
- FRANKEN TOP-Cut
- tool interface:
- straight shank
- tool interface norm:
- DIN 1835
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
- note:
- feed direction only radial
cutting diameter Ød₁ [mm]
44 mm
cutting tolerance
k10
cutting length l₂ [mm]
125 mm
neck length l₃ [mm]
142 mm
overall length l₁
217 mm
neck diameter Ød₃
38 mm
shank diameter Ød₂ [mm]
40 mm
shank diameter tolerance
h6
number of flutes Z
8
cutting material
HSSE
category
End Mill
version
Flat Face (Sharp-Edged)
product line
FRANKEN TOP-Cut
tool interface
straight shank
tool interface norm
DIN 1835
coating
without coating
internal coolant supply
without internal cooling
helix angle
30 deg
note
feed direction only radial
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.